|
VIDEO SIGNAL
Accept non-segmented Heterodyne and monochrome 525 line/60
Hz video signals or Y/C 3.58 Input
Recorder Interface
Any non-segmented VTR.
Correction range
1 Frame memory
Signal to Noise Ratio
58 dB (p-p signal to rms noise)
Residual Time Base Error
Differential phase better than 2°
Differential gain better than 2%
MONOCHROME ± 10 ns
Bandwidth
Y/C (S-VHS)
6 MHz (-3dB) Y (Luminance)
Gen Lock Range
Adjustable, more than ± 2 ms
K Factor (2T)
Y/C mode 1%
Options
Digital Drop-Out Compensator
|
Video
1V composite video signal (75 Ohms, terminated) or Y/C
3.58
Gen Lock
Black burst or standard NTSC composite video signal
Drop-Out Compensation (Optional)
R.F. from VTR (75 ohms, terminated) or TTL
OUTPUT SIGNALS
Video
1V p-p @ 75 ohms, terminated composite
Sync Drives
Adv. Sync. 1V p-p @ 75 ohms
Significant Advantage
Perhaps the most significant advantage of the AP41 over
other TBCs is its functional efficiency. The processing
amplifier controls are prestable. Each control has a
maximum useful dynamic range. Front panel buttons select
different operational modes.
PHYSICAL
Size
19² wide x 1-3/4² high x 19² deep
Rack mountable
Power
Less than 30W
Weight
12-15lbs.
Ambient Temperature
10° - 40° operating
|
UPGRADES:
AP41-SW: AP41 plus Wide bandwidth Comb Filter.
AP41-SF: AP41 plus S-VHS output, Freeze Frame/Field,
Y/C Adjustment and Strobe (16 speeds).
AP41-SP: AP41-SF plus Comb Filter (Full bandwidth
in all modes) S-VHS output, Freeze Frame/Field and Strobe.
AP41-SP-U: AP41-SP plus upgradable to SDI output.
AP41-SP-D: AP41-SP plus SDI output.
AP41-VP: Composite Input/Output with wide bandwidth
comb filter and no vertical resolution loss in frame
sync mode.
Specifications subject to change without notice.
|
