PNP415
Pop ‘N Plug® with Custom Tabletop Surface
* Customizable to all tabletops
* Connector compatible PNP400 & TNP500 series
* Holds up to eight connector plates
* Smooth new look on all sides
* Tabletop surface always matches
* Round, rectangular, or square cut-out
* Simple, slide-in installation
* Opens/closes by pressing on top
* Gas spring lift mechanism
This new PNP415 with a custom tabletop surface is the best thing that’s ever happened to your conference room!
Using your table cutout, the PNP415 is attached underneath, and when closed, the PNP415 matches the surface on the table.
Plastic rail extrusions on the connector panels exhibit a much smoother look than before, and make installation a matter of
just sliding the panels into place and tightening four screws.
The PNP415 can be custom-configured to your specific AV needs in rectangular, round, or square tabletops and opens and
closes with a mere press on the lid. The PNP415 will lift custom cutouts up to 1.4 lbs (680g).
A new preconfigured Sectional Plate, DS901-120, has been designed especially for the PNP415 and contains: 2 power
receptacles 1 VGA connector, 2 RJ45 (UTP) connectors/cables, 1 RJ11 modem (connector/cable), and 1 3.5mm
connector/cable.
All plates come with a 6ft. connector cable assembly accommodating power, AV signal and data connectivity depending
on the pop-up configuration. All sectional plates must be ordered separately.
The PNP415 and the DS901-120 are being sold separately; to save time and money, purchase the new preconfigured
PNP417 which comes with two new standard sectional plates, DS901-120 already installed.
Specifications
GENERAL ELECTRICAL
Compatibility: Power Rating (pass through AC power): 120VAC, 60Hz, 5A
Accepts DS901 STANDARD sectional plates:
DS901-120
DS901-121
Accepts PRE-CONFIGURED sectional plates:
SP3201AV
SP3203AV
SP3204AV
SP3206AV
SP3207AV
SP3208AV
SP3402CR
SP3403CR
SP3408CR
SP3212AV
MECHANICAL ACCESSORIES
Min. Table Thickness: 0.50in (13mm)
Max. Table Thickness: 1.125in (29mm)
Diameter: 4.950in (126mm)
Height, above table (open): 4.875in (124mm)
Height, below table: 6.986in (177mm)
Width: 6.00in (152mm)
Depth: 3.817in (97mm)
Max. weight of custom top: 22oz (0.624kg)
Finish: Matte Black
T° Operating: 10°C-35°C
T° Maximum: 40°C
Humidity: 90% non-condensing
|
|
|
