Our Products

Our Brands

Our Company

Click to verify BBB accreditation and to see a BBB report.

Video, Computer and AV Equipment

Viscount Video offers the complete line of each vendor's products

at guaranteed lowest prices.


1-800-VISCOUNT  

Toll-free:  1-877-847-2686

Fax:  1-513-297-0963

Video Scalers  •  Projectors  •  Replacement Lamps  •  Projection Screens  •  AV Equipment

Find In

Viscount Brands > Altinex
Altinex

ALTINEX offers a complete line of interfaces, distribution amplifiers, switchers, matrix switchers, special application products, cables, and accessories.

Signal management solutions are used to route computer video, broadcast video, audio, and control signals in presentation systems.

Items [41]
Distribution Amplifiers
DA103-110 SIDE KICKER with 2 VGA Outputs
DA103-110 SIDE KICKER with 2 VGA OutputsSidekicker® with 2 VGA Outputs

Small in size; huge in options
VGA – UXGA; 480p – 1080i
Signal present LED
9V-500mA DC adapter included
2ft video/USB cable included
2 simultaneous buffered computer video outputs
For coaxial cable runs to 250ft

The DA103-110 is a compact and powerful high-resolution 1-In, 2-Out VGA-UXGA distribution amplifier used for transmitting computer or component video from one computer to two displays simultaneously.

Easy to use, this unit offers three different options for receiving power and for your convenience, the accessories are included. You can use a 15-pin connector; if no computer is used for video, the USB connector provides the necessary power. Another popular and handy alternative is to use the +9V adapter which is included with the DA103-110 if there is not USB port available or if the port supplies insufficient power.

The DA103-110 is the only distribution amplifier offering enormous power and versatility within such an efficient design and is perfect for applications in very tight spaces.

DA103-121 - COMPACT VIDEO TWISTED PAIR RECEIVER
DA103-121 - COMPACT VIDEO TWISTED PAIR RECEIVERThe DA103-121 provides a means of receiving computer or component video signals over Twisted Pair (CAT-5) type cable when used together with an ALTINEX Twisted Pair Video Transmitter, such as the DA1930CT, TP115-110, or the DA103-120.

The DA103-121 is compact and easy to use. It offers a female 15-pin HD output and a female RJ-45 input connector, which receives the differential transmission from the Twisted Pair cable. Video equalization is available on the DA103-121 for long cable runs; when used together with a Twisted Pair transmitter having video equalization, cable runs may be up to 400 ft (122 m).

The latest generation of Twisted Pair devices uses an innovative, patented technology* developed by ALTINEX. The new signal processing technology allows transmitting and receiving fully equalized computer video signals, stereo, and audio signals over long distances. The maximum distance at full UGXA resolution is 400 ft. (122 m) between devices and may reach up to 750 ft. (230 m) at VGA resolution.


DA1222AT 1-in 2-out RGBHV High-resolution Video Distribution Amplifier
DA1222AT 1-in 2-out RGBHV High-resolution Video Distribution AmplifierThe DA1222AT is a 1-in 2-out RGBHV high-resolution video distribution amplifier designed to allow the connection of a single computer video or interface source to one or two monitors or projectors capable of handling the source resolution.

Though primarily designed to pass an RGBHV signal format, the DA1222AT can also pass RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate channels.

The DA1222AT utilizes an internal 110/220V switchable power supply and can be rack-mounted using optional hardware.

DA1706SV 1-in 6-out Video/S-Video Distribution Amplifier
DA1706SV 1-in 6-out Video/S-Video Distribution AmplifierThe DA1706SV is a 1-in 6-out distribution amplifier designed to allow the simultaneous connection of a single C-Video source and/or a single S-Video source to as many as six different display or recording devices.

This configuration, with both BNC (C-Video) and 4-pin mini-Din (S-Video) connector types, provides a unique solution for applications requiring both signal types to be distributed at the same time. Note that the DA1706SV does not convert S-Video to C-Video or C-Video to S-Video.

The DA1706SV can pass NTSC, PAL or SECAM type video signals. Due to its high bandwidth of 80 MHz, it can also pass high-resolution monochrome computer video signals. The DA1706SV will handle video signals with levels up to 1.5Vp-p.

The DA1706SV distribution amplifier has a pre-set gain of 1.05. Each output is completely independent and can withstand shorts to ground indefinitely.

While the output is pre-compensated for up to 100 feet, the DA1706SV can actually drive a signal up to 250 feet or more when it is used with high quality 75-ohm coaxial cable. If necessary, the 4-pin mini-DIN connectors (S-Video channels) can be converted to 2 BNCs with the use of optional adapter cables offered by ALTINEX (part #s MS8132MG and MS8135MG).

The DA1706SV is perfect for desktop use or it may be rack-mounted using optional hardware.

DA1908SX, 1-in 1-out VGA Line Driver
DA1908SX, 1-in 1-out VGA Line DriverThe DA1908SX is a 1-in 1-out VGA/SVGA/XGA Line Driver designed to drive a signal up to 100 feet or more using high quality VGA cable. A VGA "Y" cable (part# MS8117CA) is included with the DA1908SX, which allows for a manner of simultaneously feeding a local monitor. Use of the "Y" is only recommended for lower resolution computer video sources. If the VGA "Y" cable is used, the termination switch on the input of the DA1908SX must be turned off.

As an alternative, the DA1908SX can be ordered with a 3 foot Male to Male VGA Input cable (part# CB3703MR) which does not permit the use of a local monitor, but does enable the product to be used for high resolution signals.

DA103-107
DA103-107The new 1-In, 2-Out VGA-UXGA distribution amplifier, replacing the DA1907SX, is the smallest unit in the industry. This compact, but powerful high-resolution DA is used for transmitting computer or component video from one computer to two displays simultaneously up to 250FT using ALTINEX CB3700MR cable. It is perfect for applications in very tight spaces and also portable to carry around in yout briefcase.

DA1906SX 1-in 3-out VGA Distribution Amplifier
DA1906SX 1-in 3-out VGA Distribution AmplifierThe DA1906SX is a 1-in 3-out VGA (VGA thru UXGA) distribution amplifier designed to allow the connection of a single computer source to as many as three monitors or projectors. Offering a bandwidth of 350 MHz, the DA1906SX can pass both standard and super high-resolution VGA-type signals without degradation. The DA1906SX can drive a signal up to 100 feet or more using high quality VGA cable. Multiple DA1906SX units can also be daisy-chained together for even longer runs.

The DA1906SX is packaged with a three foot Male to Male VGA cable for connection to the output of a computer. Longer cables are optionally available for this purpose, if desired. A termination switch on the input of the DA1906SX also allows it to be used with a VGA "Y" type cable on the input instead of the 3 foot direct cable. The VGA "Y" cable provides a means of feeding a local monitor. This is not recommended if the application involves ultra high-resolution signals.

The DA1906SX is extremely compact and can be mounted to furniture or other surfaces using optional hardware.

DA1506RT 1-in 6-out VGA Distribution Amplifier
DA1506RT 1-in 6-out VGA Distribution AmplifierThe DA1506RT is a 1-in 6-out VGA/SVGA/XGA distribution amplifier designed to connect a single computer video source to as many as six scan-rate compatible displays. The DA1506RT will pass an analog video signal up to 1.5V p-p. Utilizing AGC sync circuitry, the DA1506RT converts incoming TTL sync levels to a standard 4Vp-p level.

All input and output connectors are 15-pin HD female. This provides superior durability, as the pins on male connectors can be easily bent (disabling the entire unit). A male to male VGA cable will typically be required for connection between the computer and the input to the DA1506RT.

Four ID bit switches allow a user to boot up a computer at a variety of monitor settings. Though primarily designed for use with displays utilizing 15-pin HD (VGA-type) connectors, the DA1506RT can pass RGBHV, RGBS, and RGsB format signals. Adapter cables may be necessary to accomplish the appropriate connector change.

The DA1506RT is great for desktop use, but can also be rack-mounted using optional hardware.

DA1226AT 1-in 6-out RGBHV Distribution Amplifier
DA1226AT 1-in 6-out RGBHV Distribution Amplifier[ENTER THE BRIEF DESCRIPTION HERE]The DA1226AT is a 1-in 6-out RGBHV distribution amplifier designed to allow the connection of a single computer or video interface source to as many as six monitors or projectors capable of handling the source resolution.

The DA1226AT offers excellent bandwidth performance (minimum 350 MHz), allowing it to pass high-resolution video without signal degradation.

Though primarily designed to pass an RGBHV signal format, the DA1226AT can also pass RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by utilizing the appropriate channels. The DA1226AT outputs the same sync level as it receives on its input.

The DA1226AT offers a low-profile design, which helps to prevent tilting due to cable drag when used in desktop applications. The DA1226AT uses an internal 90 to 140/200 to 240V switchable power supply and may be rack-mounted using included hardware.

DA1905GL 1-in 1-out RGBHV Line Driver/Isolator
DA1905GL 1-in 1-out RGBHV Line Driver/Isolator* 5-BNC RGBHV Input
* 6-BNC RGBSHV Buffered Output
* Compensates for cable runs up to 350 ft
* GLI on-board
* Sync Combining/Sync Separating
* Ultra compact enclosure

Includes: (1) power adapter

The Altinex - DA1905GL is a multi-purpose RGBHV line driver, ground loop isolator, and sync processor. It offers a single input (5 BNC connectors for RGBHV) and a single output (6 BNC connectors for RGBSHV). It will also accept RGBS, RGsB, component video (Y, R-Y, B-Y), S-Video, and composite video signals using the appropriate channels. With a single built-in equalization control, the DA1905GL can easily compensate for cable runs of 350 feet or more. All three R, G, and B channels are adjusted with the single control dial.

The DA1905GL also provides ground loop isolation to prevent hum bars and other artifacts caused by ground loops in a system. The common mode range of the DA1905GL is +/-.7V with a video signal of 1V p-p. (Most ground loops range between +/– 0.05 to 0.5 volts, which is well within the capabilities of the DA1905GL)

The DA1905GL also acts as a sync processor, allowing you to combine horizontal and vertical sync into composite sync or separating composite sync into horizontal and vertical sync. It can pass through a sync-on-Green signal, but does not, however, strip sync from a sync-on-Green signal.

sitemap refer us policies contact

Copyright © 2007-8 Viscount Video Sales                       Online Discount Shopping at AllGoodsOutlet

Cincinnati Web Design