Video, Computer and AV Equipment

Viscount Brands > Altinex
ALTINEX offers a complete line of interfaces, distribution amplifiers, switchers, matrix switchers, special application products, cables, and accessories. Signal management solutions are used to route computer video, broadcast video, audio, and control signals in presentation systems.

Items [41]

Prev  1-10 11-20 21-30 [31-40] 41-41  Next

TNP502 Tilt 'N Plug™ Configurable Tabletop Interconnect Box * Mounts into tabletop * Offers space for 6 Sectional Plates on one side * Variety of Sectional Plate configurations available * Opens/closes by pressing on top panel * All signals pass-through to the underside of the table * Perfect for boardrooms and conference rooms Designed for installation into a table in a presentation or boardroom, the Altinex - Tilt `N Plug™ Configurable Tabletop Interconnect Box provides access to multi-media input connections when needed, and hides them when not needed. This unit can be configured with a wide variety of data or A/V connectors before shipment from ALTINEX. Using a tilting angular construction with pneumatic lift assist and a mechanical latching mechanism, the TNP500 can either "tilt up" into a raised position to provide access to input plates, or it can be lowered flush into the table when not in use. The unit is opened and closed by pressing down on the top panel. Note that, while the TNP500 is similar in many ways to its predecessor (TNP100), it actually performs the lifting function internally, and does not require the user to lift the faceplate up. Only light pressure is required to unlatch the top to open it, and slightly more pressure to push the lid down and close the unit. The TNP500 provides six Sectional Plate slots on the exposed faceplate, servicing one side of a table. Signals are passed through the unit to the underside of the table. A variety of sectional plate connector configurations are available to populate the slots - see Sectional Plate Accessories for a list of available options. All Sectional Plates must be ordered separately. Product# TNP502 detail info  Price $695.00 Qty  Add to Cart   Buy Now

AP445-401 4-IN SCALER VIDEO, S-VID, COMPONENT, VGA BYPASS AUDIO + RS232 ProAv+ Video Scaler with Stereo Audio Four video input, composite, S-video, component and computer video NTSC or PAL Output resolution VGA – SXGA, 480p, 567p, 720p or 1080i Four audio input Signal detect Audio follow video switching Help Inside MultiTasker Friendly 100% MultiTasker compatible 1U high, 1 rack wide The AP445-401 ProAV+ Video Scaler converts Composite Video, S-Video, and Component Video signals into a variety of high-resolution Computer video or Component video signals. In addition to video, the AP445-401 has four stereo audio inputs and both balanced and unbalanced stereo outputs. The AP445-401 automatically detects and accepts either NTSC or PAL video standards for Composite and S-Video signals. The PC BYPASS computer signal may be switched to the output via a pass-through input. The Component video signals are scalable to the following output resolutions: 480p, 567p, 720p or 1080i. The Composite and S-Video signals may be scaled to VGA through SXGA resolution. Additionally, many control features allow the user access to adjust picture brightness, contrast, color, sharpness and hue. Any audio source may be selected and output to a balanced and unbalanced stereo output. The balanced output offers volume control and is adjustable over 16 steps of gain, whereas the unbalanced output is set to fixed level output. The AP445-401 may be controlled either using front panel buttons or via a standard RS-232 port. Actual control may be accomplished through a computer control system or any other device capable of sending ASCII control commands via a RS-232 port. Available commands allow audio and video input selection, image control/adjustment and volume control. In addition, the AP445-401 incorporates noise reduction filters and sophisticated 3D comb filtering. The HelpInside™ feature allows programmers to have access to command structures and control of the AP445-401 from any terminal. This technology provides easier than ever control of the AP445-401 ProAVScaler + with simple keyboard commands. No typing of long keyboard strings is necessary. Product# AP445-401 detail info  Price $1,261.00 Qty  Add to Cart   Buy Now

MT107-105 Universal Video Matrix Engine for 16X16 TP Matrix Universal Video Matrix Engine for 16X16 TP Matrix * 8x8 to 16x16 TP Matrix Engine * Full Matrix fits in one 4-U high enclosure * Up to seven cards may be connected to engine * Resolution VGA-UXGA, 480p-1080i * Compact and cost-effective Product# MT107-105 detail info  Price $2,038.00 Qty  Add to Cart   Buy Now

MX2100AV 2-in 2-out VGA +Audio Switcher with Equalization The MX2100AV is a 2-in 2-out VGA through QXGA + Audio auto-switcher with front-panel push button override, as well as manual remote capability through dual momentary contact closure switches. It is also an auto-switcher: in the absence of manual control, it can automatically switch to the active input source by sensing an incoming signal. If two inputs are active, the MX2100AV defaults to Input #2. The MX2100AV offers a main output that passes the selected source computer video signal, and a local output that passes either the selected computer video input, or alternatively, can be over-ridden by dip-switch to always pass input #1. Both video outputs are fully buffered, and both offer full video equalization, capable of compensating for cable lengths up to 300 feet (91m). In addition to switching between VGA type signals, the MX2100AV also switches stereo audio signals, providing two 3.5mm stereo mini input jacks, a 3.5mm local monitor jack always looped to input #1, and a balanced stereo audio output on a 5 pin terminal block. The MX2100AV can be mounted under a table using an ALTINEX table-mount bracket, such as the TM1271 or TM1272. It can also be rack mounted using the ALTINEX DA1293FC shelf or DA1294FC ears. Product# MX2100AV detail info  Price $382.00 Qty  Add to Cart   Buy Now

MX2456RM: 6-in 1-out VGA-UXGA + Audio Switcher A fully-featured 6-in 1-out VGA-UXGA and Stereo Audio switcher, the MX2456RM is designed for the true audio/visual professional. The MX2456RM allows the connection of up to six VGA-UXGA and audio sources to a single computer video and audio destination. Selection of the inputs can be made using the built-in front panel or through a control system/computer via RS-232. The MX2456RM is also capable of being operated in auto-switch mode, which allows the switcher to sense and switch to an active video input. Selection of audio signals can be made to either "follow" the video channel or to "break-away" from it. This is made easy using separate banks of buttons on the front panel or through RS-232 control. The MX2456RM is packed with features such as RGB Video EQ (adjusts the output to compensate for long cable runs), Audio attenuation (for volume control), auto-rotate (allows automatic sequential selection of inputs, a feature that is great for security and other monitoring applications), and Sync Delay switching (to hide the "glitch" when switching between computer video sources). All VGA-type inputs/outputs are offered on female 15-pin HD connectors and all audio inputs/outputs are offered on 5-pin terminal blocks. All audio channels can handle both balanced and unbalanced stereo or mono audio. The MX2456RM is 1U high, full rack wide and is rack-mountable using supplied hardware. Product# MX2456RM detail info  Price $855.00 Qty  Add to Cart   Buy Now

DVI SNIFFER DVI Signal Detector * Displays 6 levels on LED bar * Lifetime warranty * Operates on 2 AA batteries * Auto shut-off saves energy * 30-day money back guarantee Product# DVI SNIFFER detail info  Price $72.06 Qty  Add to Cart   Buy Now

HDMI SNIFFER HDMI Signal Detector * Displays 6 levels on LED bar * Lifetime warranty * Operates on 2 AA batteries * Auto shut-off saves energy * 30-day money back guarantee Product# HDMI SNIFFER detail info  Price $80.00 Qty  Add to Cart   Buy Now

DA2000TM Table Mount Computer Video + Audio Line Driver The DA2000TM is a computer video + stereo audio line driver designed for mounting under a table or to other surfaces in tight spots. Its extremely compact form promotes inconspicuous attachment, yet still allows for active components necessary to drive high-resolution computer signals a distance of up to 100 feet or more. The DA2000TM offers a female VGA-type 15-pin HD input connector and a stereo audio mini jack on its front panel. The rear panel offers three terminal block connectors for the connection of RGBHV, balanced stereo audio and low voltage power (9V DC). This unit is compatible with VGA, SVGA, XGA, SXGA, UXGA, and QXGA signal formats. The DA2000TM provides fully buffered, amplified outputs. Also, the DA2000TM converts an incoming unbalanced stereo audio signal to balanced stereo audio on the output. ALTINEX offers optional adhesive A/V label sheets, allowing the inputs to be labeled as needed. All accessories, including the power adapter and the input cable, must be ordered separately. Product# DA2000TM detail info  Price $218.00 Qty  Add to Cart   Buy Now

Prev  1-10 11-20 21-30 [31-40] 41-41  Next

Copyright © 2007-8 Viscount Video Sales                       Online Discount Shopping at AllGoodsOutlet