Cobalt Digital 9011

 Standard Definition D/A 10-bit SDI to Analog Composite, Y/C and Component

The 9011 is a 10-bit SDI SMPTE 259M-C to analog composite, Y/C, component YPbPr, and RGB converter. The 10-bit encoding engine oversamples 4:2:2 to 4:4:4 for internal processing, and then 4x oversamples the outputs to 16:16:16 for improved signal performance.

An internal VCXO with de-jitter loop filter to 2Hz reduces digital jitter prior to encoding, improving burst stability on composite and Y/C signals. A reference circuit color frames the 9011 for timed environments with full user digital proc. control.

Rear modules are sold separately as RM-9011-X for the 10-slot 8310 openGear™ frame, and RM20-9011-X for the 20-slot 8321 openGear™ frame. Also available is the RM20-9011-A/S high density split rear module (5 BNCs per module) for the 20-slot frame.

• Input: 270-Mbit SMPTE 259M-C
• Digital Output: Four reclocked SDI 270-Mbit SMPTE 259M-C
• Analog Output: Four outputs user configurable:
• 4 composite, 2 composite with Y/C, 1 composite and component or RGB
• Output Jitter: Internal digital de-jitter filter to 2Hz
• D/A Process
• 4x or 2x over-sampled (16:16:16 or 8:8:8)
• Frequency Response:
• 5 MHz ± 0.15 dB
• 0-6.75 MHz ± 0.25 dB
• SNR
• > 70 dB
• Proc. Control:
• Digital control of gain, DC, saturation & hue, filtering, gamma correction and DNR
• Power: 6 watts