AV Toolbox AVT-3155A

PC to Video Down Converter -

The AVT-3155A converts computer signals to standard analog video. It's settings are controlled via top panel push-buttons. The AVT-3155A’s small size makes it ideal for use with laptops or desktop computers and it handles resolutions up to 1600x1200 at 60Hz vertical refresh rate. Video outputs are simultaneously provided in Composite and S-Video formats, selectable as either NTSC or PAL. Now, you can convert anything on your computer screen for viewing on a TV set or recording on a VCR.

Getting the Best Results -
There are many factors affecting the quality of results when scaling video signals. Some basic precautions will ensure the best possible performance from your Scan Converter.

Output display device. The quality of the output signal will depend largely upon the type and quality of display device used. For instance, some video projectors just look better than others.
Distance between the Scan Converter and the display device. This plays a major role in the final result. Long distances are possible, but special measures should be taken in order to avoid cable losses. These include using high quality (coax-type) VGA cables. Line amplifiers may also be necessary.

Output connection cables. Low quality cables are susceptible to interference. They degrade signal quality due to poor matching and cause elevated noise levels. Therefore, cables should be of the best quality. Coax-type computer cables are recommended because of their superior internal shielding characteristics.

Interference from nearby electrical devices. These can have an adverse effect on signal quality. For example, an older computer monitor often emits very high electromagnetic fields that can interfere with the performance of video equipment in its proximity.

AV Toolbox AVT3155A

• Input Format Standard PC Video
• Input Signal Types VGA (640x480) through UXGA (1600x1200)
• Output Format S-Video (SV) or Composite Video (CV)
• Output Signal Types NTSC or PAL Standard
• Input Connector 1x HD-15
• Output Connectors Composite Video via 1x RCA, S-Video via 1x4 Pin DIN
• Device Control Auto PC resolution sensing, Manual NTSC/PAL Selection
• Output Adjustments Standard Image, Overscan, Underscan
• Weight 0.22lbs (100g)
• Dimensions–HxWxD 0.9” x 3.9” x 2.5” (24 x 100 x 64mm)
• Power Source 100~240VAC to 5VDC Adapter